Neighbor Shutdown - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

neighbor shutdown

[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } shutdown
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
ipv6Address variable added in JUNOSe Release 8.0.0.
Shuts down the specified neighbor or peer group without removing the neighbor or
Description
peer group configuration. The no version reenables a neighbor or peer group that
was previously shut down. The default version removes the explicit configuration
from the peer or peer group and reestablishes inheritance of the feature configuration.
Options
Address Family Configuration, Router Configuration
Mode
64
neighbor shutdown
ipAddress IP address of BGP neighbor
ipv6Address IPv6 address of BGP neighbor
peerGroupName Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.