Show Policy Port Group - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show policy port group

Displays information about pending and applied policy port groups.
show [applied] policy port group [group_name]
Syntax Definitions
applied
group_name
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Information for all policy port groups displays unless group_name is specified.
•
The display may include any of the following characters:
character definition
+ Indicates a new policy port group.
- Indicates the policy port group is pending deletion.
# Indicates that the policy port group differs between
the pending/applied port groups.
Examples
-> show policy port group
Group Name:
Slot01
Slot02
Slot03
Slot04
Slot05
Slot06
Slot07
page 39-188
Indicates that only policy port groups that have been applied should be
displayed.
The name of the policy port group for which you want to display infor-
mation; or a wildcard sequence of characters for displaying information
about port groups with similar names. Use an asterisk (*) to indicate a
wildcard character.
From Entries
blt
blt
blt
blt
blt
blt
blt
OmniSwitch CLI Reference Guide
QoS Policy Commands
November 2009