Atm E3/T3 Interface Configuration Commands; Cable; Clock - H3C MSR 20-20 Command Reference Manual

3

cable

Syntax
View
Parameter
Description
Example

clock

Syntax
View
Parameter
Description
ATM E3/T3 I
C
ONFIGURATION
cable { long | short }
undo cable
ATM T3 interface view
long: Long haul mode, with a cable length in the range 151 to 500 m (495 to
1640 ft.).
short: Short haul mode, with a cable length in the range 0 to 150 m (0 to 495 ft.).
Use the command to configure the cable length of the ATM T3 interface.
cable
Use the command to restore the default.
undo cable
By default, short haul mode applies.
# Set the cable length of ATM T3 interface 5/0 to long haul.
<Sysname> system-view
[Sysname] interface atm 5/0
[Sysname-Atm5/0] cable long
clock { master | slave }
undo clock
ATM E3/T3 interface view.
master: Sets the clock mode as master.
slave: Sets the clock mode as slave.
Use the clock command to set the clock mode of the ATM E3/T3 interface.
NTERFACE
C
OMMANDS