Stp Point-To-Point - H3C MSR Series Command Reference Manual

Syntax
stp pathcost-standard { dot1d-1998 | dot1t | legacy }
undo stp pathcost-standard
Default
The default standard used by the device is legacy.
Views
System view
Default command level
2: System level
Parameters
dot1d-1998: Configures the device to calculate the default path cost for ports based on IEEE
802.1d-1998.
dot1t: Configures the device to calculate the default path cost for ports based on IEEE 802.1t.
legacy: Configures the device to calculate the default path cost for ports based on a private
standard.
Usage guidelines
If you change the standard that the device uses in calculating the default path costs, you restore the
path costs to the default.
Examples
# Configure the device to calculate the default path cost for ports based on IEEE 802.1d-1998.
<Sysname> system-view
[Sysname] stp pathcost-standard dot1d-1998
Related commands
•
stp cost
•
display stp

stp point-to-point

Use stp point-to-point to configure the link type of the ports.
Use undo stp point-to-point to restore the default.
Syntax
stp point-to-point { auto | force-false | force-true }
undo stp point-to-point
Default
The default setting is auto and the spanning tree device automatically detects whether a port
connects to a point-to-point link.
Views
Ethernet interface view, port group view, Layer 2 aggregate interface view
Default command level
2: System level
77