H3C MSR 20-20 Command Reference Manual page 122

122 C 2: IMA-E1/T1 I
HAPTER
Parameter
Description
Example
C C
NTERFACE ONFIGURATION OMMANDS
None
Use the scramble command to enable payload scrambling on the ATM E1/T1
interface. This, however, does not affect cell headers.
Use the
undo scramble
By default, payload scrambling is enabled on an ATM E1/T1 interface.
# Enable payload scrambling on ATM interface 5/0.
<Sysname> system-view
[Sysname] interface atm 5/0
[Sysname-Atm5/0] scramble
command to disable payload scrambling.