Returning To User View; Using The Cli Online Help - H3C SR6600 Fundamentals Configuration Manual

To do...
Return to the parent view from the
current view
Executed in user view, the quit command terminates the current connection between the terminal
and the device.
In public key code view, use the public-key-code end command to return to the parent view
(public key view). In public key view, use the peer-public-key end command to return to system
view.

Returning to User View

This feature allows you to return to user view from any other view, without the need to execute the quit
command repeatedly. You can also press Ctrl+Z to return to user view from the current view.
Follow the step below to exit to user view:
To do...
Return to user view

Using the CLI Online Help

At the CLI, you can type a question mark (?) to obtain online help. See the following examples.
1) Type ? in any view to display all commands available in this view and brief descriptions for these
commands. For example:
<sysname> ?
User view commands:
archive
backup
boot-loader
bootrom
cd
clock
...Omitted...
2) Type part of a command and a ? separated by a space.
If ? is at the position of a keyword, the CLI displays all possible keywords with a brief description for
each keyword. For example:
<sysname> terminal ?
debugging
logging
monitor
quit
return
Specify archive settings
Backup next startup-configuration file to TFTP server
Set boot loader
Update/read/backup/restore bootrom
Change current directory
Specify the system clock
Send debug information to terminal
Send log information to terminal
Send information output to current terminal
Use the command...
Use the command...
1-5
Remarks
Required
Available in any view.
Remarks
Required
Available in any view except user view