Chapter 3: Connecting devices
External endpoint devices can be connected to the ports on the front panels of the installed
media modules and to the fixed front panel ports. Before you connect endpoint devices, the
G350 should be mounted and all media modules should be inserted.
!
WARNING:
To reduce the risk of fire, use only 26 AWG or larger telecommunication line cords
WARNING:
when installing telephones or adjuncts.
!
WARNING:
Attention: Pour réduire les risques d'incendie, utiliser uniquement des conductors
WARNING:
de télécommmunications 26 AWG ou de section supérieure.
Step 1: Connecting data and voice devices
There are various possible ways of connecting different devices. See your planning
documentation for any topology requirements to connect specific devices to specific ports. As
you connect devices, keep a record of the slots and ports into which specific devices are
connected. You will need this information when configuring the G350.
Connecting a switch or a network data port
The G350 can provide network switching and also supports the connection of switches. There
are various devices that may need to be connected.
Devices that may need connecting
One or more LAN switches
●
The network data ports in the office
●
Issue 4 February 2007
45