Install License And Authentication Files; Connect Laptop To Services Port Of S8300 - Avaya G700 Installation And Upgrades

3 Configuring a New G700 with an S8300 (Primary Controller or Local Survivable Processor):
• Netscape
a . Select Edit > Preferences .
b . Under Category, click Advanced .
c . Click Proxies .
d . Click Manual Proxy Configuration .
e . Click View.
f . In the Exceptions box, type 192.11.13.6. If there are any existing entries in this box, add to
the list of entries and separate entries with a ";".
g . Click OK to close the Manual Proxy Configuration dialog box.
h . Click OK again to close the Preferences dialog box.
End

Install License and Authentication Files

You load new license or authentication files from the services laptop or another computer on the network.
Note: If your S8300 Media Server is already set up for remote access, Avaya services
personnel can copy new license and authentication file information directly into
the FTP directory on the server. Avaya personnel will notify you when the new
files are in place as agreed (for example, by telephone or email). To install the
files, use the Install License and Install Avaya Authentication screens from
the S8300 main menu Web page.
Note: Before an upload or download, be sure the S8300 FTP directory contains no files
with a .pwd or.lic extension. Only one of these files can exist in a directory. If one
exists, move, rename, or delete it.
!
CAUTION:
After you install the license and authentication files, be sure to perform
Translations" on page
in the MultiVantage software. If you fail to perform this step, you may be irretrievably locked
out of the system later in the installation when the system reboots.

Connect Laptop to Services Port of S8300

Begin
To connect your laptop directly to the S8300 Media Server:
Make sure your laptop meets the hardware and software requirements.
1.
2. Plug an Ethernet crossover cable (MDI to MDI-X) into the 10/100 BaseT Ethernet network
interface card (NIC) on your laptop.
- Crossover cables of various lengths are commercially available.
- See Table 7
shown) is required
76
82. This task saves the official passwords for the customer's system
for pinout connections if needed. Crossover of the transmit and receive pairs (as
Installation and Upgrades for the G700 with an S8300/S8700
"Run Save
555-234-100 — Issue 2 — October 2002