Additional Features; H.248 Registration Source Port; Accessing Diagnostic Logs; Lan Services - Avaya G450 Overview And Specification

Additional features

H.248 registration source port

You can define the source port range that Branch Gateway uses when registering with
Communication Manager using the following CLI commands:
• set registration source-port-range
• show registration source-port-range
• set registration default source-port-range
If you do not specify the source port range, Branch Gateway selects a port within the default range
of 1024 through 65535.
For more information about these commands, see Avaya Branch Gateway G450 CLI Reference.

Accessing diagnostic logs

You can access diagnostic logs using the following CLI commands:
• show all logs
• show event-log
• system show reset-log
• show dev log file
For troubleshooting, you must send the diagnostic logs to Avaya technical support team.
For more information about accessing diagnostic logs and the related CLI commands, see
Administering Avaya G450 Branch Gateway and Avaya Branch Gateway G450 CLI Reference.

LAN services

You can use Branch Gateway as a LAN switch. You can also integrate Branch Gateway into an
existing LAN.

LAN physical media

Branch Gateway provides LAN services through the fixed LAN ports on the chassis front panel for
the connection of external LAN switches or local data devices. LAN ports are connected to an
internal LAN switch and support HP auto-MDIX, which automatically detects and corrects the
polarity of crossed cables. This simplifies LAN installation and maintenance.
April 2020 Avaya G450 Branch Gateway Overview and Specification
Comments on this document? infodev@avaya.com
Additional features
41