Accessing the Avaya G250/G350 Media Gateway
Manual re-authentication
You can perform a manual re-authentication at any time. To perform a manual re-authentication,
enter set port dot1x re-authenticate, followed by the module and port number (or
range of ports). For example:
G250-001(super)# set port dot1x re-authenticate 10/5-10
G350-001(super)# set port dot1x re-authenticate 6/5-10
When you perform a manual re-authentication, the port or ports attempt to re-authenticate the
host immediately.
Optional 802.1x commands
Enter set port dot1x port-mode, followed by the module and port number and an
●
authentication mode, to specify a port's mode of authentication: port-based (single
supplicant) or MAC-based (multiple supplicants).
Enter clear dot1x config to return the 802.1x values to default and disable the
●
802.1x application on the G250/G350.
Enter set port dot1x initialize, followed by the module and port number (or
●
range of ports) to initialize a port or ports.
Enter set dot1x quiet-period, followed by a time period in seconds (0 to 65535), to
●
set the minimum idle time between authentication attempts for all ports on which 802.1x is
enabled.
Enter set port dot1x quiet-period, followed by the module and port number (or
●
range of ports) and a time period in seconds (0 to 65535), to set the minimum idle time
between authentication attempts for a specific port or ports.
Enter set dot1x tx-period, followed by a time period in seconds (1 to 65535), to set
●
the time internal between attempts to access the Authenticated Station for all ports on
which 802.1x is enabled.
Enter set port dot1x tx-period, followed by the module and port number (or range
●
of ports) and a time period in seconds (0 to 65535), to set the time internal between
attempts to access the Authenticated Station for a specific port or ports.
Enter set dot1x server-timeout, followed by a time period in seconds (1 to 65535)
●
to set the retransmission timeout period for the backend authenticator to wait for a reply
from the Authentication Server.
Enter set dot1x supp-timeout, followed by a time period in seconds (1 to 65535), to
●
set the authenticator-to-supplicant retransmission timeout period (the time for the
G250/G350 to wait for a reply from the Authenticated Station) for all ports on which 802.1x
is enabled.
70 Administration for the Avaya G250 and Avaya G350 Media Gateways