Set Radius Authentication Udp-Port - Avaya G450 Cli Reference Manual

CLI Commands
User Level
read-write
Context
general
Example
To set the primary RADIUS authentication server IP address to be 192.40.12.36:
G450-001# set radius authentication server 192.40.12.36 primary
Related Commands
clear radius authentication
retry-number,
authentication

set radius authentication udp-port

Use the set radius authentication udp-port command to set the RFC 2138 approved
UDP port number.
Normally, the UDP port number should be set to its default value of 1812. Some early
implementations of the RADIUS server used port number 1645.
Syntax
set radius authentication udp-port number
Parameters
Parameter
number
User Level
read-write
Context
general
Example
To set the UDP port number to 1645:
G450-001# set radius authentication udp-port number 1645
848 Avaya G450 CLI Reference
server, set radius
set radius authentication
udp-port, show radius authentication
Description
The UDP port number
authentication, set radius authentication
retry-time, set radius authentication
Possible Values
RADIUS authentication
secret, set radius
Default Value
1812