Neighbor Advertisement-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

neighbor advertisement-interval

neighbor { ipAddress | ipv6Address | peerGroupName } advertisement-interval seconds
Syntax
no neighbor { ipAddress | ipv6Address | peerGroupName } advertisement-interval
[ seconds ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
ipv6Address variable added in JUNOSe Release 8.0.0.
Sets the minimum interval between the sending of BGP updates for a given prefix.
Description
The no version restores the default interval.
Options
Address Family Configuration, Router Configuration
Mode
ipAddress IP address of BGP neighbor
ipv6Address IPv6 address of BGP neighbor
peerGroupName Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.
seconds Interval in seconds between update messages; in the range 0–600;
default value is 30 seconds for external peers and 5 seconds for internal peers
Chapter 2: N Commands
neighbor advertisement-interval
27