Table 132: Show Ip Dhcp-Local Reserved Output Fields; Monitoring Static Ip Address And Mac Address Pairs Supplied By Dhcp Local Server - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

Table 131: show ip dhcp-local limits Output Fields (continued)
Related Topics

Monitoring Static IP Address and MAC Address Pairs Supplied by DHCP Local Server

Display the static IP address/MAC address pairs that the DHCP local server supplies
Purpose
in standalone mode.
To display information about static IP address/MAC address pairs:
Action
host1#show ip dhcp-local reserved
----------
cablemodem
cablemodem
Table 132 on page 579 lists the show ip dhcp-local reserved command output fields.
Meaning

Table 132: show ip dhcp-local reserved Output Fields

Field Name
Ethernet Limit
Limit
Count
Denied
Total Denied
show ip dhcp-local limits
Pool Address
------------
10.44.44.100
10.44.44.101
Field Name Field Description
Pool Name of pool in which the address is reserved
Address IP address that is reserved
Monitoring Static IP Address and MAC Address Pairs Supplied by DHCP Local Server
Chapter 22: Monitoring and Troubleshooting DHCP
Field Description
Number of leases available for each Ethernet
subnet
Number of leases available to the specified
interface or subinterface; indicates the
configured value for the interface type unless a
specific lease value is configured for the
particular interface
Number of active leases on the interface
Number of lease requests denied during the
current denial period; this number is reset to
zero (and the denial period restarted) when the
number of active leases no longer exceeds the
configured limit
Total number of lease requests denied on the
interface since the interface became active
Dhcp Reserved Addresses
-----------------------
Hardware
-----------------------------------------------
12-34-12-34-12-34-00-00-00-00-00-00-00-00-00-00
22-33-22-33-22-33-00-00-00-00-00-00-00-00-00-00
579