Ip Dhcp-External Server-Address - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
ip dhcp-external server-address
Syntax
Release Information
Description
Options
Mode
760
[ no ] ip dhcp-external server-address ipAddress
Command introduced before JunosE Release 7.1.0.
Configures a DHCP server that is used to determine which DHCP packets are monitored.
The no version removes the DHCP server.
ipAddress—IP address of the external DHCP server; you can specify a maximum of four
servers
Global Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers