Monitoring Radius Dynamic-Request Server Information - Juniper POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X Configuration Manual

Table 65: show mirror subscribers Output Fields (continued)
Related Topics

Monitoring RADIUS Dynamic-Request Server Information

Display RADIUS dynamic-request server configuration information and statistics.
Purpose
To display RADIUS dynamic-request server configuration information:
Action
host1#show radius dynamic-request servers
-------------
192.168.2.3
10.10.120.104
host1#show radius dynamic-request statistics
RADIUS Request Statistics
-----------------------------
UDP Port
Disconnect Requests
Disconnect Accepts
Disconnect Rejects
Disconnect No Session ID
Disconnect Bad Authenticators
Disconnect Packets Dropped
CoA Requests
CoA Accepts
CoA Rejects
CoA No Session ID
CoA Bad Authenticators
CoA Packets Dropped
No Secret
Unknown Request
Invalid Addresses Received
Field Name
Subscriber ID Method
Secure Policy Type
Secure Policy List
Sessions Mirrored
show mirror subscribers
RADIUS Request Configuration
----------------------------
Udp
IP Address Port Disconnect
---- ----------
1700 disabled
1700 disabled
-------------------------
Statistic
Chapter 14: Monitoring Packet Mirroring
Field Description
Method used to identify the subscriber
Type of secure policy; IP, IPv6, or L2TP
Name of secure policy list used for packet mirroring
Number of sessions being mirrored
Change
Of
Authorization
-------------
disabled
disabled
10.10.3.4
-------
1700
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:0
Monitoring RADIUS Dynamic-Request Server Information
Secret
------
<NULL>
mysecret
269