Adding A Radius Server - Juniper NETWORK AND SECURITY MANAGER NSMXPRESS - QUICK START REV1 Quick Start Manual

NSMXpress Quick Start
26
NOTE: You need System Administration or NSM Administration permission
to manage RADIUS servers in the NSMXpress WebUI.
Adding a RADIUS Server on page 26
Changing the Priority of RADIUS Servers on page 27
Deleting a RADIUS Server on page 27
Editing RADIUS Server Parameters on page 27

Adding a RADIUS Server

To add a RADIUS server:
Select
System Administration
1.
appears listing the RADIUS Servers that have been added. See Figure 29 on page 26.
Figure 29: RADIUS Servers Dialog Box
Click to add a RADIUS Server to the WebUI. The Add Radius Server dialog box
2. Add
appears. See Figure 30 on page 26.
Figure 30: Add RADIUS Server Dialog Box
Configure the following parameters in the Add RADIUS Server dialog box:
3.
a. : The name of the user to be authenticated by the RADIUS server.
Name
b. : The IP address or the hostname of the RADIUS Server.
Server address
c. : The shared secret NSMXpress and the RADIUS server use for secure
Shared secret
authentication.
> . The RADIUS Servers dialog box
Radius Management
Copyright © 2010, Juniper Networks, Inc.