Adding A Radius Server - Juniper NETWORK AND SECURITY MANAGER NSM3000 - QUICK START REV 1 Quick Start Manual

NSM3000 Quick Start
26
The following sections explain how to manager a RADIUS server:
Adding a RADIUS Server on page 26
Changing the Priority of RADIUS Servers on page 27
Deleting a RADIUS Server on page 27
Editing RADIUS Server Parameters on page 27

Adding a RADIUS Server

To add a RADIUS server:
Select System Administration
1.
appears listing the RADIUS Servers that have been added. See Figure 30 on page 26.
Figure 30: RADIUS Servers Dialog Box
Click to add a RADIUS Server to the WebUI. The Add Radius Server dialog box
2. Add
appears. See Figure 31 on page 26.
Figure 31: Add RADIUS Server Dialog Box
Configure the following parameters in the Add RADIUS Server dialog box:
3.
a. : The name of the user to be authenticated by the RADIUS server.
Name
b. Server address : The IP address or the hostname of the RADIUS Server.
c. : The shared secret NSM3000 and the RADIUS server use for secure
Shared secret
authentication.
d. Auth Port : The RADIUS authentication software port. (We recommend UDP port
1812)
> Radius Management . The RADIUS Servers dialog box
Copyright © 2010, Juniper Networks, Inc.