Monitoring The Nas-Port-Format Radius Attribute; Table 57: Show Radius Override Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual
Software for e series broadband services routers broadband access configuration guide
Hide thumbs
Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12:
- Configuration manual (750 pages)
Table of Contents
Advertisement
JunosE 11.3.x Broadband Access Configuration Guide
Action
Meaning
Related
Documentation
Monitoring the NAS-Port-Format RADIUS Attribute
Purpose
Action
304
To display the current setting for all configured RADIUS attributes:
host1#show radius override
nas-ip-addr:
nas-ip-addr
nas-port-id:
nas-port-id
calling-station-id:
calling-station-id
nas-info:
from current virtual router
host1#show radius override
nas-ip-addr: nas-ip-addr
nas-info:
from authentication virtual router
Table 57 on page 304 lists the show radius override command output fields.
Table 57: show radius override Output Fields
Field Name
nas-ip-addr
nas-port-id
calling-station-id
nas-info
show radius override
Display information for the NAS-Port attribute.
To display the setting for the NAS-Port attribute:
host1#show radius nas-port-format
0ssssppp
To display information about the NAS-Port attribute on an ATM interface on an E320
Broadband Services Router:
Field Description
Displays the current setting for the NAS-IP-Address
[4] attribute. These settings can be changed with the
radius override nas-ip-addr tunnel-client-endpoint
and radius override nas-info commands.
Displays the current setting for the NAS-Port-Id [87]
attribute. Use the radius override nas-port-id
remote-circuit-id command to override the standard
NAS-Port-Id attribute with the PPPoE remote circuit
ID transmitted from the DSLAM.
Displays the current setting for the Calling-Station-Id
[31] attribute. Use the radius override
calling-station-id remote-circuit-id command to
override the standard Calling-Station-Id attribute with
the PPPoE remote circuit ID transmitted from the
DSLAM.
Displays the current setting for the NAS-Identifier [32]
attribute. This setting can be changed with the radius
override nas-info command, which is used for AAA
broadcast accounting.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Troubleshooting
