Monitoring The Nas-Port-Format Radius Attribute; Table 57: Show Radius Override Output Fields - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

JUNOSe 11.1.x Broadband Access Configuration Guide
To display the current setting for all configured RADIUS attributes:
Action
host1#show radius override
nas-ip-addr:
nas-port-id:
calling-station-id:
nas-info:
host1#show radius override
nas-ip-addr: nas-ip-addr
nas-info:
Table 57 on page 304 lists the show radius override command output fields.
Meaning

Table 57: show radius override Output Fields

Related Topics

Monitoring the NAS-Port-Format RADIUS Attribute

Display information for the NAS-Port attribute.
Purpose
To display the setting for the NAS-Port attribute:
Action
host1#show radius nas-port-format
0ssssppp
304
Monitoring the NAS-Port-Format RADIUS Attribute
nas-ip-addr
nas-port-id
calling-station-id
from current virtual router
from authentication virtual router
Field Name
nas-ip-addr
nas-port-id
calling-station-id
nas-info
show radius override
Field Description
Displays the current setting for the NAS-IP-Address
[4] attribute. These settings can be changed with the
radius override nas-ip-addr tunnel-client-endpoint
and radius override nas-info commands.
Displays the current setting for the NAS-Port-Id [87]
attribute. Use the radius override nas-port-id
remote-circuit-id command to override the standard
NAS-Port-Id attribute with the PPPoE remote circuit
ID transmitted from the DSLAM.
Displays the current setting for the Calling-Station-Id
[31] attribute. Use the radius override
calling-station-id remote-circuit-id command to
override the standard Calling-Station-Id attribute with
the PPPoE remote circuit ID transmitted from the
DSLAM.
Displays the current setting for the NAS-Identifier
[32] attribute. This setting can be changed with the
radius override nas-info command, which is used
for AAA broadcast accounting.