Table 44: Ancp (L2C)-Related Keywords For Radius Include Command - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

radius include l2cd-keyword
Copyright © 2010, Juniper Networks, Inc.
RADIUS Access-Request, Acct-Start, and Acct-Stop messages. Also, if you specify
Acct-Stop messages, the router includes ANCP information in Interim-Acct messages
that the router sends to RADIUS. By default, the router does not include the ANCP-related
information provided by the Juniper Networks VSAs in RADIUS messages.
These Juniper Networks ANCP-related VSAs are based on definitions in GSMP extensions
for layer2 control (L2C) Topology Discovery and Line
Configuration—draft-wadhwa-gsmp-l2control-configuration-00.txt (July 2006
expiration).
Use to include ANCP-related Juniper Networks VSAs in Access-Request, Acct-Start,
and Acct-Stop messages that the router sends to RADIUS. If you enable inclusion of
the ANCP-related VSAs in Acct-Stop messages, the router also includes the VSAs in
Interim-Acct messages. Inclusion is disabled by default.
You must enable ANCP discovery with the discovery-mode command prior to
configuring the radius include command with the ANCP-related VSAs. Configuring
discovery mode enables the RADIUS authentication server to retrieve ANCP information.
Table 44 on page 231 lists the ANCP (L2C)-related keywords that you can use in the
radius include command and the associated Juniper Networks VSAs. The table also
indicates the mappings between ANCP parameters and the VSAs.

Table 44: ANCP (L2C)-Related Keywords for radius include Command

Command Keyword
l2cd-acc-loop-cir-id
l2cd-acc-aggr-cir-id-bin
l2cd-acc-aggr-cir-id-asc
l2cd-act-data-rate-up
l2cd-act-data-rate-dn
l2cd-min-data-rate-up
l2cd-min-data-rate-dn
l2cd-att-data-rate-up
l2cd-att-data-rate-dn
l2cd-max-data-rate-up
l2cd-max-data-rate-dn
l2cd-min-lp-data-rate-up
Juniper Networks Juniper Networks
VSA Number VSA Name
[26-110] Acc-Loop-Cir-Id
[26-111] Acc-Aggr-Cir-Id-Bin
[26-112] Acc-Aggr-Cir-Id-Asc
[26-113] Act-Data-Rate-Up
[26-114] Act-Data-Rate-Dn
[26-115] Min-Data-Rate-Up
[26-116] Min-Data-Rate-Dn
[26-117] Att-Data-Rate-Up
[26-118] Att-Data-Rate-Dn
[26-119] Max-Data-Rate-Up
[26-120] Max-Data-Rate-Dn
[26-121] Min-LP-Data-Rate-Up
Chapter 3: Configuring RADIUS Attributes
ANCP ANCP
Type Subtype
1 –
2 –
3 –
4 129
4 130
4 131
4 132
4 133
4 134
4 135
4 136
4 137
231