Configuring Secure Access General Session Options (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual

Related
Documentation

Configuring Secure Access General Session Options (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
Table 9: IP Alias Configuration Details
Option Function
VLAN Specifies role-based source IP
aliases. If you want to direct
traffic to specific sites based on
roles, you can define a source IP
alias for each role.
Select Configures virtual ports you
Source IP define for the internal interface
source IP address.
Configuring Secure Access General Session Options (NSM Procedure) on page 39
Creating and Configuring Secure Access Device Administrator Roles (NSM Procedure)
on page 43
Creating and Applying a Secure Access Device Template on page 29
Verifying Imported Device Configurations on page 19
To specify session time limits, roaming capabilities, session and password persistency,
request follow-through options, and idle timeout application activity, follow these steps:
In the NSM navigation tree, select Device Manager > Devices. Click the Device Tree
1.
tab, and then double-click the Secure Access device for which you want to configure
user roles.
Click the Configuration tab, and select Users > User Roles. The corresponding
2.
workspace appears.
Click the New button and the New dialog box appears.
3.
Click General > Session Options to add or modify settings as specified in Table 10 on
4.
page 40.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modification.
Chapter 6: Configuring User Roles and Administrator Roles
Your Action
Select the VLAN you want to use from the VLAN
list, if you have defined VLAN ports on your
system.
NOTE: If an end user is mapped to multiple roles
and the Secure Access device merges roles, the
Secure Access device associates the source IP
address configured for the first role in the list with
the merged role.
Select a source IP address from the list.
NOTE: You can specify the same source IP
address for multiple roles. You cannot specify
multiple source IP addresses for one role.
39