Example: Configuring Netscreen5Gt Devices As A Firewall Using The Pppoe And Adsl Interfaces (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01 Manual

Configuring ScreenOS Devices Guide
Related
Documentation
Example: Configuring NetScreen5GT Devices as a Firewall Using the PPPoE and ADSL
Interfaces (NSM Procedure)
96
For Username, enter Alex.
For Password, enter tSOCbme4NW5iYPshGxCy67Ww48ngtHC0Bw==
Select Update DHCP Server.
Leave all other defaults and click OK to save the PPPoA instance, and then click OK
9.
to save the device configuration.
After you have updated the device with the modeled configuration, the device
administrator can activate PPPoA on the local network.
First, the device administrator powers down the NetScreen-5GT ADSL security device
and all workstations in the Trust zone, and then powers on just the device. The device
makes a PPPoA connection to the DSLAM, and obtains the IP address for the ADSL
interface and the IP addresses for the DNS servers.
Finally, the device administrator powers on the workstations to activate DHCP; the
workstations automatically receive the IP address for the DNS server and obtain an IP
address for themselves when they attempt a TCP/IP connection.
Example: Configuring NetScreen5GT Devices as a Firewall Using the PPPoE and ADSL
Interfaces (NSM Procedure) on page 96
Wireless Interface on ScreenOS Devices Overview on page 99
Configuring DSCP Options Overview on page 99
In this example, you configure the NetScreen-5GT ADSL security device as a firewall with
the primary Internet connection through the ADSL interface using PPPoE and a backup
Internet connection through the serial modem port and dialup connection.
To configure a NetScreen-5GT device as a firewall using PPPoE ADSL interface:
Add the NetScreen-5GT ADSL security device.
1.
For device name, enter ADSL PPPoE.
Select Model Device.
For device platform, select ns5GTadsl-Home-Work.
Configure the ADSL Interface. In the device navigation tree, select Network > Interface.
2.
Right-click the ADSL1 interface and select the Edit icon. Configure the General
Properties tab:
Copyright © 2010, Juniper Networks, Inc.