Ntp Access-Group - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

ntp access-group

ntp access-group { peer | serve-only | serve | query-only } accessListName
Syntax
no ntp access-group { peer | serve-only | serve | query-only }
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the type of broadcasts that the router will accept and respond to, and
Description
specifies the servers from which the router will accept broadcasts. The no version
enables the router to receive all NTP broadcasts on interfaces configured to receive
broadcasts.
NOTE: The router can accept, but does not use, NTP control queries.
Options
Global Configuration
Mode
peer Enables the router to receive time requests, receive NTP control queries,
and synchronize itself to the servers specified on the access list
serve-only Enables the router to receive time requests and NTP control queries
from servers specified on the access list, but not to synchronize itself to the
specified servers
serve Enables the router only to receive time requests from the servers specified
on the access list
query-only Enables the router only to receive NTP control queries from the
servers specified on the access list
accessListName Name of the access list
Chapter 2: N Commands
97
ntp access-group