Notification Id - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

notification id

notification id { mteEventSetFailure | mteTriggerFailure | mteTriggerFalling |
Syntax
mteTriggerRising }
no notification [ id ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies a trap notification for an event. The no version removes the notification.
Description
Options
SNMP Event Configuration
Mode
id MIB object for notification use
mteEventSetFailure Trap to indicate an event set failure
mteTriggerFailure Global trap to indicate the failure of a trigger
mteTriggerFalling Trap to indicate a falling trigger event
mteTriggerRising Trap to indicate a rising trigger event
Chapter 2: N Commands
91
notification id