Managing Secure Access Node From A Cluster - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual

Configuring Secure Access Devices Guide
Related
Documentation

Managing Secure Access Node from a Cluster

Table 88: Cluster Status Page Information
User Interface Element
Status Information
Add Members
Enable
Disable
Remove
Fail-Over VIP
Member Name
298
Table 87: Archiving Secure Meetings Details (continued)
Option
Delete meetings older than
this number of days (days)
Archive meeting records
before deleting
Archive meeting records on
node
Configuring User Access, Admin Access, Events and Sensors (NSM Procedure) on
page 305
Managing Large Binary Data Files (NSM Procedure) on page 295
Table 88 on page 298 describes the information displayed on the Status tab and the
various management tasks you can perform including disabling, enabling, and removing
a Secure Access device node from a cluster.
Description
Displays the cluster name, type, configuration, internal VIP, and external VIP for
an active/passive cluster.
Specifies a device to add the cluster. You must perform this step for device systems
you intend to add to the cluster. By clicking this button, you can add multiple nodes
at the same time.
Adds a node that was previously disabled. When you add a node, all stated
information is synchronized on the node.
Disables a node within the cluster. The node retains awareness of the cluster, but
does not participate in state synchronizations or receive user requests unless
members sign in to the node directly.
Removes the selected node or nodes from the cluster. Once removed, the node
runs in standalone mode.
Fails over the VIP to the other node in the active/passive cluster. This option is
enabled only if cluster is configured as Active/passive.
Lists all nodes belonging to the cluster. You can click a node to modify its name
and network settings.
Function
Specifies the status of the old
meetings before they are being
archived.
Archives secure meetings in a
cluster configuration.
Specifies the node that performs
the archive.
Your Action
Enter the number of days.
Select the Archive meeting
records before deleting
option to enable this feature.
Enter the node.
Copyright © 2010, Juniper Networks, Inc.