Validating Management System Status; Upgrading The User Interface; Downloading And Installing The Ui Client Automatically - Juniper NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 Installation Manual

Validating Management System Status

Upgrading the User Interface

Downloading and Installing the UI Client Automatically

Copyright © 2010, Juniper Networks, Inc.
/usr/netscreen/HaSvr/bin/haSvr.sh start
If you start the HA Server process, then it automatically starts the GUI Server and Device
Server processes.
NSM processes always run with nsm user permissions, even if you have root permissions
when you start them.
If you specified that you want the installer to start servers when finished, we recommend
that you view the status of the HA, Device, and GUI Servers to confirm that all services
are running.
To check the status of the HA Server process, enter the following command:
/usr/netscreen/HaSvr/bin/haSvr.sh status
To check the status of the GUI Server, enter the following command:
/usr/netscreen/GuiSvr/bin/guiSvr.sh status
To check the status of the Device Server, enter the following command:
/usr/netscreen/DevSvr/bin/devSvr.sh status
See "Controlling the Management System" on page 171 for more information on manual
commands that you can send to the management system.
For Release 2007.3 and later releases of the UI client, you can upgrade to the 2010.4
Release automatically. For earlier releases, you must manually download and install the
new UI client.
Downloading and Installing the UI Client Automatically on page 149
Downloading and Installing the UI Client Manually on page 150
Validating the Upgrade on page 150
To update an existing NSM Client that supports automatic downloading:
Connect to the server using the client. If your current client release version is
1.
incompatible with the server release version, a confirmation dialog box appears.
Click Yes to download the new client.
2.
Select a local directory, name a file in which to save the new NSM Client, and then
3.
click Select Save Directory for Installer. The new client downloads automatically
and starts the InstallAnywhere wizard.
Follow the directions in the wizard to complete the installation.
4.
Connect to the server again using the new client. The NSM login dialog box appears.
5.
Enter your username and password to establish a connection with the server.
6.
Chapter 6: Upgrading to NSM 2010.4 from an Earlier Version
149