Neighbor Route-Reflector-Client - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

neighbor route-reflector-client

[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName }
Syntax
route-reflector-client
Command introduced before JUNOSe Release 7.1.0.
Release Information
ipv6Address variable added in JUNOSe Release 8.0.0.
Configures a router as a BGP route reflector and configures the specified neighbor
Description
as its client. The no version indicates that the neighbor is not a client. The default
version removes the explicit configuration from the peer or peer group and
reestablishes inheritance of the feature configuration.
Options
Address Family Configuration, Router Configuration
Mode
ipAddress IP address of BGP neighbor being identified as a client
ipv6Address IPv6 address of BGP neighbor being identified as a client
peerGroupName Name of BGP peer group. If you specify a BGP peer group by
using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command. You cannot override the
characteristic for a specific member of the peer group.
Chapter 2: N Commands
neighbor route-reflector-client
61