Connect Printers; Connecting Printers Using Tcp/Ip; Task List; Administering Adjunct Parameters - Avaya CMC1 Installation, Upgrades And Additions

Note:
When you move ESM circuit packs, you MUST remove the DS1 and signaling
Note:
group translations. You cannot use the change circuit pack command.
Refer to Expansion services module

Connect printers

This section provides information on connecting and configuring printers that work with your
system and Avaya™ Communication Manager.

Connecting printers using TCP/IP

Printers can be connected to the switch using asynchronous TCP/IP links and a terminal server.
This section provides information on connecting adjuncts to the C-LAN and providing the initial
administration.

Task list

Whether you use an end-to-end TCP/IP configuration, a terminal server or a PC running RSP,
you must complete the following tasks:
Administering IP node names
Administering IP services

Administering adjunct parameters

If you are using a terminal server, also complete
server on page 297.
If you are using a PC with the Downloadable RSP Tool, complete
reliable session-layer protocol (RSP) tool
Administering adjunct parameters
You must administer adjunct parameters to let the system know that the adjunct is connected
through TCP/IP.
PMS journal and PMS log printers
See Guestworks® and DEFINITY® Systems Technician Handbook for Hospitality Installations,
555-231-743.
on page 320 for further information.
on page 309.
on page 309.
on page 323.
on page 324.
Installing and administering the terminal
Using the downloadable
Issue 10 June 2005
Connect printers
323