Set Tcp/Ip Properties On Windows Systems; Change Tcp/Ip Properties And Network Settings (Windows 2000 And Xp) - Avaya G700 Installation And Upgrades

3 Configuring a New G700 with an S8300 (Primary Controller or Local Survivable Processor):
The names of the dialog boxes and buttons vary on different operating systems and browser releases. Use
your computer's help system if needed to locate the correct place to enter this information.
Note:
The S8300 Media Server uses the same access configuration as an Avaya S8100 Media Server with
CMC1 Media Gateway. If you already have a NetSwitcher profile for the S8100 Media Server
(formerly called DEFINITY One), try using that profile first before configuring a new one.

Set TCP/IP properties on Windows systems

TCP/IP administration varies among Windows systems as described below.
Note:
Check Your Version of Windows
Begin
Log in to your laptop, and double-click the My Computer icon on your desktop.
1.
The My Computer window opens.
Click Help on the My Computer window's toolbar.
2.
The Help menu opens and displays the version of Windows installed on your laptop.
Follow the appropriate procedure,
3.
2000 and XP)" on page 72
Millennium Edition [ME])" on page
End

Change TCP/IP Properties and Network Settings (Windows 2000 and XP)

Begin
Right-click My Network Places on your desktop or under the Start menu in XP.
1.
Select Properties to display the Network and Dial-up Connections window.
2.
Windows should have automatically detected the Ethernet card in your system and created a LAN
connection for you. More than one connection may appear.
Right-click the correct Local Area Connection from the list in the window.
3.
Select Properties to display the Local Area Connection Properties dialog box.
4.
72
Avaya Service technicians can use the NetSwitcher program to configure
alternate network profiles so they can easily connect to a number of different
systems. NetSwitcher configures a profile for each type of system for easy
future access without requiring you to reset TCP/IP properties or browser set-
tings manually. NetSwitcher is available from an Avaya Services CTSA.
Make a record of any IP addresses, DNS servers, or WINS entries that you
change when you configure your services computer. Unless you use the
NetSwitcher program or an equivalent, you will need to restore these entries
to connect to other networks.
"Change TCP/IP Properties and Network Settings (Windows
or "Change TCP/IP properties (Windows 95, 98, NT 4.0, and
73.
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002