Administer Call Routing Rules - Avaya G860 Configuring Manual

4.6. Administer Call Routing Rules

The following steps describe the administrative procedures for administering call routing
rules on the Avaya G860 Media Gateway to enable call origination/termination between
the Avaya Meeting Exchange Enterprise S6800 Conferencing Server and the PSTN.
•
Configuring Tel To IP Routing (Avaya G860 Media Gateway to Avaya SIP
Enablement Services and Avaya Meeting Exchange Enterprise S6800
Conferencing Server)
Step Description
4.6.1 Administer call routing rule(s) that are applied to calls originating from the PSTN
to the Avaya Meeting Exchange Enterprise S6800 Conferencing Server by
adding Tel To IP routing rule(s) as follows:
•
Click on the SIP tab Routing tab.
•
Click on the Tel To IP tab.
•
From the Sip Tel To IP Routing List pane that is displayed, click on the
Note: The Tel To IP routing table is used to route incoming Tel calls from the
PSTN to IP addresses. This routing table associates a called/calling telephone
number's prefix with a destination IP address or with an FQDN (Fully Qualified
Domain Name). When a call is routed through the Avaya G860 Media Gateway,
the called and calling numbers are compared to the list of prefixes on the IP
Routing Table (up to 50 prefixes can be configured). Calls that match these
prefixes are sent to the corresponding IP address or FQDN. If the number dialed
does not match these prefixes, the call is not made.
RJ; Reviewed:
SPOC 3/23/2009
icon to add routing rule(s).
Solution & Interoperability Test Lab Application Notes
©2009 Avaya Inc. All Rights Reserved.
53 of 71
MXS6800SES-G860