License File With Survivable Remote Server; Downloading License And Authentication Files; Downloading Recent Firmware; Gateway Authentication File - Avaya G450 Manual

Before you install
10. Select a location where you want to save the file, and click Save.
11. (Optional) If you receive an error message, click the message, install Active X, and
continue with the download.
12. (Optional) When the system displays the security warning, click Install.
When the installation is complete, PLDS displays the downloads again with a check mark
next to the downloads that have completed successfully.

License file with Survivable Remote Server

If you are installing an S8300 as a Survivable Remote Server (SRS), the license file for the S8300
must have a Communication Manager release that is equal to or greater than that of the server
that acts as primary controller. This is necessary so that if control passes to the SRS, it can allow
the same level of call processing as that of the primary controller.
Additionally, the SRS must have a version of Avaya Aura
identical to that of the primary controller.
The license file requirements of the SRS should be identified in your planning documentation.

Downloading license and authentication files

If you are installing a Branch Gateway with an S8300 Server as a primary controller, you need
license and authentication files for the Communication Manager.
You can use the Maintenance Web Interface to install the Communication Manager license and
authentication files.

Downloading recent firmware

About this task
Download any recently updated firmware for the Branch Gateway and media modules to your
laptop. Visit the Avaya Support website
image file versions against the factory installed versions in the hardware you are installing.
Download any firmware image file upgrades you need from the Avaya Support website, and any
Communication Manager service packs that may be required for the upgrade.

Gateway authentication file

An authentication file is preinstalled in the gateway, and can be updated if needed. Check the
authentication file version using the 'show auth-file info' function. Gateway firmware version 6.x
and newer (including versions 7.0.0+) use the 6.x authentication files.
October 2019
www.avaya.com/support
Deploying and Upgrading Avaya G450 Branch Gateway
Comments on this document? infodev@avaya.com
®
Communication Manager that is
to check the latest firmware
14