Call Processing In Sls Mode - Avaya G450 Manual

Configuring Standard Local Survivability (SLS)
The new Avaya 96xx IP phone family is not directly referenced in the G450 CLI. When you
administer these phones via the CLI, use the following mapping:

Call processing in SLS mode

In survivable mode, SLS provides only a limited subset of Avaya Communication Manager call
processing functionality:
Limited call routing through a Survivable ARS Analysis Table (in the PIM application or
●
through the CLI) and COR calling permissions
Inbound calls are directed in one of three ways:
●
- Using the Incoming-Routing form
- Using the Set Incoming-Destination on the Trunk group form, which enables
mapping to a given station
- Inbound calls are directed to a previously-administered pool of available stations (the
Survivable Trunk Dest? field is y on the Station form). The search algorithm is
circular so that the incoming calls are fairly distributed.
!
Important:
SLS permits 911 calls, but the specific location information is not transmitted to
Important:
the Public Service Answering Point (PSAP). Only the general trunk-identifying
information is transmitted. Emergency personnel will have a general location
associated with the trunk (for example, a building address), but nothing more
specific (for example, a room or office number). Also, if a 911 call disconnects for
any reason, emergency personnel cannot reliably call the originator back.
A small business office's address is sufficient from the perspective of emergency
routing.
Communication Manager Feature Access Codes for ARS, contact closure, and Hold
●
120 Administration for the Avaya G450 Media Gateway
Table 27: Mapping Avaya 96xx IP phones for CLI administration
Module name
9610
9620
9630
9640
9650
CLI interface name
4606
4610
4620
4620
4620