Set Spantree Default-Path-Cost - Avaya G450 Cli Reference Manual

CLI Commands

set spantree default-path-cost

Use the set spantree default-path-cost command to set the version of the spanning
tree default path cost used by the current bridge.
Syntax
set spantree default-path-cost pathcost
Parameters
Parameter
pathcost
User Level
read-write
Context
general
Example
To use the rapid-spanning-tree default path cost:
G450-001(super)# set spantree default-path-cost rapid-spanning-tree
Spanning tree default path costs is set to rapid spanning tree.
Related Commands
set port spantree,
spantree priority,
hello-time, set spantree
version, show spantree
1104 Avaya G450 CLI Reference
Description
The version of the
spanning tree default
path cost
set port spantree cost,
set spantree enable |
max-age, set spantree
Possible Values
common-spanning-tree -
compatible with IEEE802.1D
standard
rapid-spanning-tree -
compatible with IEEE802.1W
standard
set port spantree force-protocol-migration,
disable, set spantree
priority, set spantree
Spanning tree
Default Value
forward-delay, set spantree
tx-hold-count,
set port
set spantree