Instance Path-Cost; Instance Priority - Avaya 2330 Reference Manual

[no]
<type>
Example
AG/configure/interface/ethernet (6/1)/spanning-tree# link-type
shared

instance path-cost

Use this command to configure the cost of a path for an MSTP instance.
Syntax
[no] path-cost <value>
Table 101: Variable definitions
Variable
[no]
<value>
Example
AG/configure/interface/ethernet (6/1)/spanning-tree/instance 2#
path-cost 1

instance priority

Use this command to configure the port priority for an MSTP instance.
Syntax
[no] priority <value>
Command Line Reference
Restores the default link type (point-to-point)
for an interface.
Specifies the link type. Valid values are point-
to-point and shared. The default value is
point-to-point.
Value
Restores the default path cost value for an
MSTP instance.
Specifies the path cost that you assign to the
MSTP instance. Valid values are 1 to
200000000. The default value is auto-
detect.
instance path-cost
August 2013 119