Table of Contents
Advertisement
Example:
Using the protocol name:
W310-1(super/ACL 330/ip rule 21)# ip-protocol igmp
Done!
Using the number assigned to the protocol:
W310-1(super/ACL 330/ip rule 21)# ip-protocol 2
Done!
ip qos-group
User level: privileged, supervisor.
Command Mode: AP Group Interface
Command Mode:
Use the ip qos-group command to activate a specific QoS list for an AP Group in the
direction specified.
Syntax:
ip qos-group <policy-list-number> {in | out}
Syntax
<policy-list-number>
Example:
W310-1(super/AP-Group group-1)# ip qos-group 402 out
Avaya W310 Command Reference Guide
Description
QoS list to activate. This is a range of 401 to 499. The default is
401.
Chapter 10
W310 Policy Commands
201
Advertisement
Table of Contents
