Set Qos Signal - Avaya G450 Cli Reference Manual

CLI Commands
Example
To specify that QoS values are configured locally via the CLI:
G450-001(super)# set qos control local
Related Commands
set qos bearer,

set qos signal

Use the set qos signal command to provide the means to set up QoS signaling
parameters, DSCP or 802.1Q, for the Media Gateway Processor.
Syntax
set qos signal {dscp | 802p} value
Parameters
Parameter
dscp
802p
value
User Level
read-write
Context
general
Example
To set up DSCP parameter 43:
G450-001(super)# set qos signal dscp 43
Related Commands
set qos bearer,
840 Avaya G450 CLI Reference
set qos signal, show qos-rtcp
Description
Keyword that specifies to
setup DSCP parameters
Keyword that specifies to
setup 802.1Q parameters
Parameter value
set qos control, show qos-rtcp
Possible Values Default Value
For dscp: 0-63 For dscp: 34
For 802p: 0-7 For 802p: 7
QoS