Show Ip Route Summary - Allied Telesis AT-x510-28GTX Command Reference Manual

R C
OUTING OMMANDS

SHOW IP ROUTE SUMMARY

show ip route summary
Overview This command displays a summary of the current RIB (Routing Information Base)
entries.
To modify the lines displayed, use the | (output modifier token); to save the output
to a file, use the > output redirection token.
Syntax show ip route summary
Mode User Exec and Privileged Exec
Example To display a summary of the current RIB entries, use the command:
awplus#
Output Figure 23-3: Example output from the show ip route summary command
Related show ip route
Commands
show ip route database
C613-50102-01 REV C
show ip route summary
IP routing table name is Default-IP-Routing-Table(0)
IP routing table maximum-paths is 4
Route Source Networks
connected 5
ospf 2
Total 8
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
808