Show Ip Route Database - Allied Telesis AT-IX5-28GPX Manual

R C
OUTING OMMANDS

SHOW IP ROUTE DATABASE

show ip route database
Overview This command displays the routing entries in the RIB (Routing Information Base).
When multiple entries are available for the same prefix, RIB uses the routes'
administrative distances to choose the best route. All best routes are entered into
the FIB (Forwarding Information Base). To view the routes in the FIB, use the
ip route
To modify the lines displayed, use the | (output modifier token); to save the output
to a file, use the > output redirection token.
Syntax
Mode User Exec and Privileged Exec
Example To display the static routes in the RIB, use the command:
awplus#
Output Figure 18-2: Example output from the show ip route database command
Codes: C - connected, S - static, R - RIP
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
> - selected route, * - FIB route, p - stale info
C *> 10.10.31.0/24 is directly connected, vlan2
S *> 10.10.34.0/24 [1/0] via 10.10.31.16, vlan2
C *> 10.30.0.0/24 is directly connected, vlan6
S *> 11.22.11.0/24 [1/0] via 10.10.31.16, vlan2
S *> 16.16.16.16/32 [1/0] via 10.10.31.16, vlan2
C *> 45.45.45.45/32 is directly connected, lo
C *> 127.0.0.0/8 is directly connected, lo
The routes added to the FIB are marked with a *. When multiple routes are
available for the same prefix, the best route is indicated with the > symbol. All
unselected routes have neither the * nor the > symbol.
Related show ip route
Commands
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
command.
Parameter Description
Displays only the routes learned from connected interfaces.
connected
Displays only the static routes you have configured.
static
show ip route database static
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
O - OSPF, IA - OSPF inter area
show
703