ADTRAN AOS Version R10.1.0 Command Reference Manual page 2292

Command Reference Guide Frame Relay Subinterface Command Set
ipv6 route-cache
Use the ipv6 route-cache command to enable Internet Protocol version 6 (IPv6) fast-cache switching on
the interface. Use the no form of this command to disable fast-cache switching and return to process
switching mode.
Syntax Description
No subcommands.
Default Values
By default, fast-cache switching is enabled on all Ethernet and virtual Frame Relay subinterfaces. IP route
cache is enabled for all virtual Point-to-Point Protocol (PPP) interfaces.
Command History
Release 18.2 Command was introduced.
Functional Notes
Fast switching allows an IPv6 interface to provide optimum performance when processing IPv6 traffic.
Usage Examples
The following example enables IPv6 fast switching on the Frame Relay subinterface:
(config)#interface frame-relay 1.16
(config-fr 1.16)#ipv6 route-cache
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 2292