Table of Contents
Advertisement
Command Reference Guide
Frame Relay Subinterface Command Set
ipv6 nd ra suppress
Use the ipv6 nd ra suppress command to specify whether Internet Protocol version 6 (IPv6) router
advertisement (RA) messages will be suppressed. This command only applies to interfaces in router mode.
Use the no form of this command to begin sending RA messages.
Syntax Description
No subcommands.
Default Values
By default, RA messages are not suppressed. When IPv6 routing is not enabled on the router, or when
implemented in a host-only mode, the default setting is to suppress advertisements on all interface types.
Command History
Release 18.1
Command was introduced.
Usage Examples
The following example suppresses RA messages on the interface:
(config)#interface frame-relay 1.16
(config-fr 1.16)#ipv6 nd ra suppress
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
2290
Advertisement
Table of Contents
