Mpls Ldp Neighbor Password - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

mpls ldp neighbor password

mpls ldp neighbor ipAddress password passwordString
Syntax
[ no ] mpls ldp neighbor ipAddress password
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the password used to compute MD5 checksums for authenticating the
Description
specified LDP neighbor when the peer attempts to establish a TCP connection. The
no version deletes the password for the peer.
Options
Global Configuration
Mode
1348
mpls ldp neighbor password
ipAddress IP address of remote peer
passwordString Password; alphanumeric string in the range 1–40 characters