Neighbor Password - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

neighbor password

neighbor { ipAddress | ipv6Address | peerGroupName } password [ 0 | 8 ] string
Syntax
no neighbor { ipAddress | ipv6Address | peerGroupName } password
Command introduced before JUNOSe Release 7.1.0.
Release Information
ipv6Address variable added in JUNOSe Release 8.0.0.
Enables MD5 authentication on a TCP connection between two BGP peers. The no
Description
version disables MD5 authentication.
Options
Address Family Configuration, Router Configuration
Mode
52
neighbor password
ipAddress IP address of the BGP neighbor
ipv6Address IPv6 address of BGP neighbor
peerGroupName Name of the BGP peer group to which this neighbor belongs.
If you specify a BGP peer group by using the peerGroupName argument, all the
members of the peer group inherit the characteristic configured with this
command, unless it is overridden for a specific peer.
0 Indicates that the MD5 password is entered in unencrypted form (plaintext)
8 Indicates that the MD5 password is entered in encrypted form (ciphertext)
string MD5 password, an alphanumeric text string of up to 16 characters