Mpls Ldp Neighbor Password - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

mpls ldp neighbor password

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
mpls ldp neighbor ipAddress password passwordString
[ no ] mpls ldp neighbor ipAddress password
Command introduced before JunosE Release 7.1.0.
Configures the password used to compute MD5 checksums for authenticating the
specified LDP neighbor when the peer attempts to establish a TCP connection. The no
version deletes the password for the peer.
ipAddress—IP address of remote peer
passwordString—Password; alphanumeric string in the range 1–40 characters
Global Configuration
Chapter 13: M Commands
1361