Lists; Creating Or Modifying Classifier Control Lists For Gre Tunnel Policy Lists; Creating Or Modifying Classifier Control Lists For Ip Policy Lists - Juniper POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X Configuration Manual

JUNOSe 11.1.x Policy Management Configuration Guide
Related Topics
Creating or Modifying Classifier Control Lists for ATM Policy Lists
You can create or modify a classifier control list that can be used only in ATM policy

lists.

Related Topics
Creating or Modifying Classifier Control Lists for Frame-Relay Policy Lists
You can create or modify a classifier control list that can be used only in Frame Relay
policy lists.
Related Topics

Creating or Modifying Classifier Control Lists for GRE Tunnel Policy Lists

You can create or modify a classifier control list that can be used only in GRE tunnel
policy lists.
10
Creating or Modifying Classifier Control Lists for ATM Policy Lists
For information about the hardware and software CLACLs that are supported
for each interface type, see Policy Resources Overview on page 159.
For information about monitoring Classifier Lists, see Monitoring Policy
Management Overview on page 181.
Issue the atm classifier-list command:
host1(config)#atm classifier-list atmclassifier color red user-packet-class 10
clp 1
atm classifier-list
Issue the frame-relay classifier-list command.;
host1(config)#frame-relay classifier-list frclassifier color red user-packet-class
10 de-bit 1
frame-relay classifier-list
Issue the gre-tunnel classifier-list command:
host1(config)#gre-tunnel classifier-list greClassifier50 color yellow
user-packet-class 7 dsfield 40