Bgp Router-Id - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

bgp router-id

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
bgp router-id ipAddress
no bgp router-id [ ipAddress ]
Command introduced before JunosE Release 7.1.0.
Sets the BGP identifier. The no version restores the router ID as the identifier.
ipAddress—IP address to be used as the BGP identifier; ignored if present in the no
version
Router Configuration
Chapter 3: B Commands
295