Router-Id; Routing-Options - Juniper JUNOS OS 10.3 - SOFTWARE Manual

router-id

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

routing-options

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
router-id address;
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options],
[edit logical-systems logical-system-name routing-options],
[edit routing-instances routing-instance-name routing-options],
[edit routing-options]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Specify the routing device's IP address.
NOTE: We strongly recommend that you configure the router identifier under
the [edit routing-options]
the interface address on a loopback interface changes.
—IP address of the routing device.
address
Default: Address of the first interface encountered by the Junos OS
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Router Identifiers for BGP and OSPF
routing-options { ... }
[edit],
[edit logical-systems logical-system-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name],
[edit routing-instances routing-instance-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure protocol-independent routing properties.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Protocol-Independent Routing Properties Configuration Statements
Chapter 73: Configuration Statements for Layer 3 Protocols
hierarchy level to avoid unpredictable behavior if
1957