Router-Id; Routing-Options - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

router-id

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

routing-options

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
2186
®
OS for EX Series Ethernet Switches, Release 10.4
router-id address;
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options],
[edit logical-systems logical-system-name routing-options],
[edit routing-instances routing-instance-name routing-options],
[edit routing-options]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Specify the routing device's IP address.
NOTE: We strongly recommend that you configure the router identifier under
the [edit routing-options]
the interface address on a loopback interface changes.
address —IP address of the routing device.
Default: Address of the first interface encountered by the Junos OS
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Router Identifiers for BGP and OSPF
routing-options { ... }
[edit],
[edit logical-systems logical-system-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name],
[edit routing-instances routing-instance-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure protocol-independent routing properties.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Protocol-Independent Routing Properties Configuration Statements
hierarchy level to avoid unpredictable behavior if
Copyright © 2010, Juniper Networks, Inc.