Retransmit - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

Chapter 6: R Commands

retransmit

retransmit retries
Syntax
no retransmit
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the maximum number of times a router retransmits a RADIUS packet to
Description
an authentication or accounting server. The no version restores the default value.
retries Number of retries, in the range 0–100; default value is 3
Options
RADIUS Configuration
Mode
391
retransmit