Table of Contents
Advertisement
JUNOSe 11.0.x Command Reference Guide A to M
l2tp tunnel default-receive-window
l2tp tunnel default-receive-window receiveWindowSize
Syntax
no l2tp tunnel default-receive-window
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the default L2TP receive window size (RWS) for a tunnel on both the LAC
Description
and the LNS. The RWS is the number of packets that the peer can transmit without
receiving an acknowledgment from the router. This command affects only those
tunnels configured on the router after the command is issued; it has no effect on
previously configured tunnels. The no version restores the default behavior, in which
the router chooses the default RWS.
Options
Global Configuration
Mode
1174
l2tp tunnel default-receive-window
receiveWindowSize Default receive window size, in packets; currently, the only
supported value is 4
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 and is the answer not in the manual?
Questions and answers