32
M
Y
N
ANAGING
OUR
Changing Flow
Attributes
A
ETWORK
CTIVITY
You can change the flow attributes on the graphs using the options available in the
Layers box. You can display bytes per second, packets per second, and hosts per
interval.
Each option has a series of items to display specific details of your current view.
Table 3-2 Layers Box
Parameter
Bytes/Second
Packets/Second
Number of Hosts
Unique Ports
Description
Specifies the traffic layer as the number of bytes per second for
the interval. Options include: Normal, Log, Bits/Second,
Bytes/Packet, Bytes/Host, and 1/x.
When this option is selected, details on the highest volume
networks are displayed in the TopN box.
Specifies the traffic layer as the number of averaged packets per
second. Options include: Normal, Log Packets/Hosts, and 1/X.
When this option is selected, details on the highest volume
networks are displayed in the TopN box.
Specifies the traffic layer by the total number of active hosts seen
during the interval. Options include: Normal, Log Packets/Hosts,
and 1/X.
When this option is selected, details on the highest volume
networks are displayed in the TopN box.
Specifies the traffic layer as the number of ports in use. Options
include: Normal, Log, and 1/X.
When this option is selected, details on the highest volume
networks are displayed in the TopN box.
STRM Users Guide